|Place of Origin:||Guangdong , China|
|Certification:||API , IOS , CE, 3A , FDA|
|Model Number:||AX 300|
|Minimum Order Quantity:||1 set|
|Packaging Details:||Export wooden box packaging|
|Delivery Time:||8 - 12 work days|
|Payment Terms:||L/C, D/P, T/T, Western Union, MoneyGram|
|Supply Ability:||1000 Pieces per Month|
|Rotor Type:||Rubber / Copper Tri Lobe Rotor||Axial And Radial Casing Protection:||Hard Metal|
|Seal:||Mechanical Seal||Flow:||15-975 M³/h|
|Power:||30-315 KW||Medium:||Oil Sludge|
|Rate Of Flow:||25 L/rev||Pump Of Material:||Grey Cast Iron|
Multi Lobe Rotary Lobe Sludge Pump,
Rotary Lobe Sludge Pump Antiwear,
Multipurpose Oil Sludge Pump
Good Clean-In-Place And CIP / SIP Multi Lobe Pump For Oil Sludge
Lobe Pump Overview
Lobe pumps are used in a variety of industries including pulp and paper, chemical, food, beverage, pharmaceutical, and biotechnology. They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics.
|ACCUVON||rate of flow
Note: Above flange is regular for each model, besides we also offer various flange connection according to your requirements
1. Tested medium in the table: water.
2. Speed, flow rate, electrical power and pressure will be according to different liquid properties.
3. Port size can be changed as needed.
4. ACCUVON reserves the right to change specifications without prior notification.
Lobe pump manufacture use high precision 5-axis CNC machining. Our rotor perfectly seal with the inlets and outlets chamber, pump suction ability can reach to 9 meters. The material of the rotor can be selected according to the characteristics of conveying medium. We have many kinds of rotor material for selection, including anti-wear elastomers, hard steel, stainless steel and etc.
Our lobe pumps design is compact, can be installed in extremely limited space. The design of flange and placement of the motor can be adjusted to fit for the customer's space constraints.
Pump body choose inblock casting, the error is minimal. Body material can be cast iron and stainless steel. Chamber inside have replaceable protective liner. The liner surface can be hardened to increase wear resistance.
Our lobe pump is unilateral shaft support design, fluid chamber can be quickly disassemble. Rotors and other accessories can be replaced in a few minutes without remove the pump inlet and outlet pipes. Also lobe pump have few wearing parts, it make lobe pump lower shutdown time and lower using cost.
Very high efficiency, about 60% to 85%.
The Particles Size
Lobe pump have wide fluid chamber, no block problem.
Self-priming and Dry Running
Lobe pump have good self-priming ability, reach to 9.5m, and can allow a certain time dry running.
Quality inspection photos