Mobile Diesel Flood Pump / Resistant To Solids / Self-Priming
Powerful and ready for use right away
Accuvon Rotary Lobe Pumps are ideal as mobile, self-priming rotary lobe pumps on vehicle trailers when needed fast in the event of a flood, canal work, pumping station support, waste water treatment and for disasters. Suction and pressure hoses are installed in just a few minutes.
Whether in case of flooding, with overloaded sewage systems, flooded roads or extinguishing water feeding, reliable, mobile high-quality pumps are mandatory in these emergency situations.
Accuvon high-quality mobile pumps can be mounted on a car or truck trailer. Driven by a combustion motor, they work fully independently.
Whether a tarp / roof bow construction with a convertible roof or an additional power generator − nearly every request can be realized. The motor can be equipped with a sound enclosure for use in residential areas.
The Department of Emergency Management (DEM) has been relying on Accuvon mobile pumps for many years. The high-quality pumps have proven their worth in many flooded areas around the world.
The high flow rate (up to 4000 m3/h)
Unlike the widely used centrifugal pumps for flood relief purposes, Accuvon rotary lobe pumps are resistant to solids and hardly decrease in their performance under high pressure.
Durable and resistant
The DEM places great importance on self-priming pumps which run smoothly when conveying sandy sewage, solids, fibrous materials and oil.
Benefits at a glance
|easy to transport||Accuvon hand cart pumps are easy to push to the application site where they are required.|
|ready for use right away||The pumps are ready for use right away − connect the hoses and start the motor.|
|suitable for standalone pumping||Driven by a combustion motor, our DEM pumps are suitable for standalone use in virtually any situation.|
|powerful Flow rates of up to 4000 m³/h|| |
|high-quality control technology||The pump is very easy to operate via its control technology. The display shows all relevant pump and motor parameters.|
|constant flow rate, even in high-pressure situations||Even in high-pressure situations (e.g. due to long pumping distances), the flow rate of Accuvon pumps remains constant.|
|resistant to solids, self-priming and capable of running dry for a short time||These capabilities make the pumps suitable for universal use. Even mud-laden media can be conveyed without problems.|
|user-friendly||The pumps are very easy to operate.|
|very easy to maintain||The pump can be maintained within a few minutes at any given location.|
Accuvon is a specialist for rotary lobe pumps. We offer 16 pump sizes with flow rates of 1 –4,000 m³/h and a large selection of equipment and additional parts. The large-scale geometry and short passage enable the medium to be pumped gently.
Features of Accuvon Rotary Lobe Pumps:
1.Self-priming, Valve-less, Positive Displacement Pump
2. Easy Maintenance through Front Cover
3. Controllable Flow, Ratio up to 1 : 5
4. Capacity of up to 4000 m³/h
5.Pressures of up to 25 bar
6. Dry-running Capability
7.Reversibility, same pump output for both directions
8. Gentle, Low-Pulsation Pumping
9.For Viscous, Solid, Abrasive or Shea-sensitive Mediums
10. Low Parts Replacement Costs
Components of a Accuvon Rotary Lobe Pump
1 Timing gear
2 Quench and control chamber
3 Casing in block design
4 Unwetted shaft
5 Axial and radial casing protection
6 Shaft seal
8 Quick-release cover